Paving terms explained

What Is Base Course?

The layer you never see once the job is done, and the one that decides how long the pavement lasts.

Quick answer: Base course is the load-bearing layer of a pavement, sitting between the soil (the subgrade) and the asphalt surface. On a driveway it is usually compacted crushed stone. It spreads the weight of vehicles over the soil and lets water drain away.

Local
Family run, based in Dillsburg
Since 2000
Serving Central PA
Free Quotes
Honest, no pressure

What the base course does

Asphalt is flexible, so it needs something firm under it. The base course takes the weight of a vehicle and spreads it over a wider area of soil, so no one spot is overloaded. It also gives water somewhere to go, so it does not sit under the asphalt and freeze.

A base that is too thin, uneven or poorly compacted is behind most driveways that rut, crack or sink early.

Stone base and asphalt base

On most driveways the base is crushed stone, placed in layers and compacted. On roads and heavy-duty lots, the lower layer of asphalt is itself a base or binder course: a coarser, stronger mix that goes down first, with a finer surface course on top.

The layers of an asphalt pavement, top to bottom

LayerMade ofJob
Surface courseFine hot mix asphaltThe smooth wearing surface you drive on
Binder or base courseCoarser hot mix asphaltStrength under the surface
Stone baseCompacted crushed stoneCarries and spreads the load, drains water
SubgradeThe native soil, graded and compactedThe foundation everything sits on

Key Takeaways

  • Base course is the load-bearing layer under the asphalt surface.
  • On driveways it is usually compacted crushed stone.
  • It spreads weight over the soil and lets water drain.
  • It is built in layers, each one compacted.
  • A weak base causes most early pavement failures.

Frequently Asked Questions

What is base course made of?

On a driveway, base course is usually crushed stone compacted in layers. On roads and heavy-duty pavements it can also be a coarse hot mix asphalt laid under the surface course.

What is the difference between base course and subgrade?

The subgrade is the native soil, graded and compacted. The base course is the layer of stone built on top of it. The asphalt goes on top of the base.

How thick should the stone base be under a driveway?

It depends on the soil and what will drive on it. Soft or wet soil and heavy vehicles call for a deeper base, so the depth is set after looking at the site.

Can asphalt be laid without a base course?

Not if it is expected to last. Asphalt laid straight on soil moves when the soil gets wet or freezes, and it cracks and sinks within a few seasons.

Planning a new driveway or lot?

We build the base and pave it with the same crew. Free written quotes across Central PA.

Call 717-932-8920
Call for a Free Quote