Paving terms explained

What Is Tack Coat?

The thin, sticky layer you see sprayed on a road or driveway just before new asphalt goes down.

Quick answer: Tack coat is a thin layer of liquid asphalt, usually an asphalt emulsion, sprayed onto an existing paved surface just before a new layer of asphalt is laid. It works as the glue that bonds the new layer to the old one so the two act as a single pavement.

Local
Family run, based in Dillsburg
Since 2000
Serving Central PA
Free Quotes
Honest, no pressure

Why tack coat matters

Asphalt layers are only strong when they are bonded. Without tack, a new layer can slide on the one beneath it. That shows up later as crescent-shaped slippage cracks, shoving where vehicles brake and turn, and layers that peel apart.

Tack is used when resurfacing over old asphalt, between the binder and top courses of a new pavement, and along the cut edges of a patch so the new material seals to the old.

How it is applied

The surface is swept clean first, because tack bonds to dust instead of pavement if dirt is left on it. The emulsion is sprayed in a thin, even film, then left to break, which is when the water evaporates and the color turns from brown to black. Paving follows once it is tacky.

Tack coat, prime coat and sealcoat

TermWhere it goesWhat it does
Tack coatOn an existing paved surface, under new asphaltBonds the new layer to the old
Prime coatOn a stone base, under the first layer of asphaltBinds the top of the base and helps the asphalt grip
SealcoatOn top of finished asphaltProtects the surface from sun, water and oil

Key Takeaways

  • Tack coat is liquid asphalt sprayed between pavement layers.
  • Its job is bonding, so the layers act as one pavement.
  • It is used in resurfacing, between courses and at patch edges.
  • The surface has to be clean and the tack has to break before paving.
  • Skipping it leads to slippage cracks and layers that separate.

Frequently Asked Questions

What is tack coat made of?

Tack coat is usually an asphalt emulsion, which is liquid asphalt suspended in water. Once sprayed, the water evaporates and leaves a thin sticky film of asphalt on the surface.

Is tack coat necessary when resurfacing a driveway?

Yes. Tack coat is what bonds the new layer to the old pavement. Without it the overlay can slide, crack and peel away from the surface underneath.

How long does tack coat take to dry?

It needs to break before paving, meaning the water has evaporated and the color has turned from brown to black. In warm, dry weather that takes a short time, and longer when it is cool or humid.

What is the difference between tack coat and prime coat?

Tack coat goes on an existing paved surface to bond a new asphalt layer to it. Prime coat goes on a stone base before the first layer of asphalt.

Thinking about resurfacing?

We will look at the surface and tell you plainly whether an overlay will hold. Free written quotes across Central PA.

Call 717-932-8920
Call for a Free Quote