Free tool

Sealcoat Coverage Calculator

Enter the size of your driveway or lot, pick its condition and the number of coats, and get the gallons of sealer the job takes.

Quick answer: One gallon of driveway sealer covers roughly 60 to 100 square feet per coat, about 80 on an average surface. A 600 square foot driveway therefore takes about 8 gallons for one coat and 15 for two. Rough, older or never-sealed asphalt soaks up more.

Local
Family run, based in Dillsburg
Since 2000
Serving Central PA
Free Quotes
Honest, no pressure

What changes how far sealer goes

The surface matters more than the product. Smooth asphalt that has been sealed before takes the least. Old, rough or porous asphalt, and any surface that has never been sealed, drinks in the first coat and can use half as much again.

The second coat always goes further than the first, because the first one has already filled the pores. Two thin coats also wear better than one thick coat, which is why two is the default in the calculator.

Coverage by surface condition

SurfaceCoverage per gallon, per coatTypical of
Smooth, in good shapeAbout 100 square feetNewer asphalt that has been sealed before
AverageAbout 80 square feetMost driveways
Rough, older or never sealedAbout 60 square feetWeathered, porous or raveled asphalt

Key Takeaways

  • A gallon of sealer covers roughly 60 to 100 square feet per coat.
  • Use about 80 square feet per gallon for an average driveway.
  • Rough, old or never-sealed asphalt needs more sealer.
  • Two thin coats wear better than one thick coat.
  • Fill cracks before sealing. Sealer does not close them.

Frequently Asked Questions

How many square feet does a 5 gallon bucket of sealer cover?

About 300 to 500 square feet for one coat, depending on the surface. On an average driveway, plan on roughly 400 square feet per five-gallon pail per coat.

How much sealer do I need for my driveway?

Divide the square footage by about 80 to get the gallons for one coat on an average surface, and double it for two coats. A 600 square foot driveway takes about 15 gallons for two coats.

Is one coat of sealer enough?

One coat is enough on a surface that is sealed regularly and still in good shape. Two thin coats are better on asphalt that is older, has faded or has never been sealed.

Does rough asphalt use more sealer?

Yes. Rough and porous asphalt has more surface for the sealer to fill, so it can take half as much again as a smooth driveway of the same size.

Would you like it done for you?

We clean the surface, fill the cracks and seal it, and the quote is free. Serving Dillsburg, Harrisburg, York, Mechanicsburg and the surrounding towns.

Call 717-932-8920
Call for a Free Quote